Intact Battery Bike-Power GEL51913

Motorcycles with many additional consumers, e.g. with seat and grip heating or connected navigation system, require significantly more power. GEL batteries withstand this cycling well, i.e. a consuming load, if necessary with recharging with a charger. The intAct Bike-Power GEL also has a special internal construction with a special grid structure, which enables an uncharacteristically high starting power for GEL batteries.

The gel-like bonded electrolyte ensures lower self-discharging than with wet or AGM batteries. Ideal for occasionally or seasonally driven vehicles.

Stored safely in the gel-like bonded electrolyte, the grids lose less active material than in a normal AGM or wet battery, so they remain powerful for longer.

Facts

Function

• Small self-discharge. For seasonal use.
• Very high vibration resistance. Electrolyte bound as gel.
• 30 % more starting power than a classic battery of the same case size. For motorcycles with many consumers, also ABS.
• Completely maintenance-free. Sealed block battery, where refilling is not possible and not necessary.
• Filled and charged. Ready for use immediately.
• Leakproof. Can also be installed in an inclined position, as the electrolyte is bound as a gel and the battery is tightly sealed.
• VRLA battery (Valve Regulated Lead Acid) with safety valve against gas overpressure in the battery.

Technical Information

• Capacity: 21 AH (c20)
• Cold testing current: 300 A (EN)
• Voltage: 12 Volt
• Dimensions (LxWxH): 185 x 80 x 170 mm